DE2 Ch08 Task Sheets
MHT1C001 Inspect crankshaft vibration damper; inspect engine mounts; determine needed action.
MHT1C002 Remove, inspect, service, and install pans, covers, gaskets, seals, wear rings, and crankcase ventilation components; determine needed action.
MHT1C004 Install and align flywheel housing; inspect flywheel housing(s) to transmission housing/engine mating surface(s); and measure flywheel housing face and bore runout; determine needed action.
MHT1C005 Inspect flywheel/flexplate (including ring gear) and mounting surfaces for cracks and wear; measure runout; determine needed action.
MHT1C006 Disassemble and clean engine block; inspect engine block for cracks/damage; measure mating surfaces for warpage; check condition of passages, core/expansion plugs, and gallery plugs; inspect threaded holes, studs, dowel pins, and bolts for serviceability; determine needed action.
MHT1C007 Inspect cylinder sleeve counter bore and lower bore; check bore distortion; determine needed action.
MHT1C008 Clean, inspect, and measure cylinder walls or liners for wear and damage; determine needed action.
MHT1C009 Replace/reinstall cylinder liners and seals; check and adjust liner height (protrusion).
MHT1C013 Inspect main bearings for wear patterns and damage; replace as needed; check bearing clearances; check and correct crankshaft end play.
Last modified: Monday, 5 August 2024, 3:26 PM