|
STEP 1
Familiarize yourself with the shop layout. Study and understand the various warning signs around your shop. Identify exits and plan your escape route. Know the designated gathering point and go there in an emergency.
STEP 2
Check for air quality. Locate the extractor fans or ventilation outlets and make sure that they are not obstructed in any way. Locate and observe the operation of the exhaust extraction hose, pump, and outlet used on the vehicle’s exhaust pipes.
STEP 3
Check the location, type, and operation of fire extinguishers in your shop. Be sure you know when and how to use each type of fire extinguisher.
STEP 4
Find out where flammable materials are kept, and make sure that they are stored properly.
STEP 5
Check the hoses and fittings on the air compressor and air guns for any damage or excessive wear. Be particularly careful when troubleshooting air guns. Never pull the trigger while inspecting one. Severe eye damage can result.
STEP 6
Identify caustic chemicals and acids associated with activities in your shop. Ask your supervisor for information on any special hazards in your particular shop and any special avoidance procedures that may apply to you and your working environment.
|
